| Non Komodite 380V .3P.50HZ | Kantite |
| PVC WPC FOAM BOARD PWODIKSYON LINESoti nan extruder pou anpileur 1.automatic sistèm manje 2.SJSZ80/156 konik jimo vis extruder 3. T-mouri mwazi (L2450, W1220, T: 5-25mm) 4.cooling kalibrasyon platfòm -4 koup kalibratè Mwazi tanperati kontwolè 2 ansanm 5.cooling sipò 6.uit pè kawoutchou woulèt traction ak Koupe ak pèseptè pousyè tè
|  |
| 20HP fanatik refwadisman chillerPanasonic COMPRESSOR
|  |
0.8MPA lè COMPRESSOR |  |
| SWP360 ékrazan |  |
| SMF630 pulvertizer machin ak sistèm vibre |  |
| SHR500/1000 chofaj/refwadisman mixer ak kontwòl varyateur 75kw | |
 |  |
SJSZ-80/156 PVC difisil sifas kim tablo liy
| No | Non | Kalite | Kantite | Mak |
| 1.1 | Konik jimo vis extruderAvèk manjeur prentan otomatik | SJSZ-80/156 | 1 ansanm | Ekipe ak manjeur prentan otomatik |
| 1.2 | Sistèm kontwòl elektrik | 1 ansanm | Delta frekans konvètisè, Siemens kontakteur | |
| 1.3 | Mwazi | SJM-1350 | 1 ansanm | Aparèy fisèl lwil oliv nan pò mouri, kontwòl otomatik tanperati |
| 1.4 | Vacuum anviwònman mouri | SDX-1500 | 1 ansanm | 4-etap refwadisman dimensionnement |
| 1.5 | Bwote koupe | SQY-1400 | 1 ansanm | 8 ansanm, 16 woulo. |
| 1.6 | Bracket refwadisman | SJTJ-3000 | 1 ansanm | |
| 1.7 | Aparèy koupe longè | SQG-1220 | 1 ansanm | |
| 1.8 | Transverse machin koupe | SQG-1220 | 1 ansanm | |
| 1.9 | Aparèy dechaje plak | SJS-1220 | 1 ansanm | |
| 1．10 | mixer cho ak frèt | SHR500/1000 | 1 ansanm | |
| 1.11 | Ékrazan | SWP-380 | 1 ansanm | |
| 1.12 | Moulen | SMP-630 | 1 ansanm | |
enstriksyon
| NO | ENSTRIKSYON | SPESIFIKASYON |
| 2．1 | MATERYÈL BRITÈ | PVC Ajoute materyèl oksilyè |
| 2．2 | Gwosè tablo | 5-25 × 1220 |
| 2．3 | Vitès liy | 0.7-1m/min |
| 2．4 | MAX SOTI | 350-500kg / h |
| 2．5 | GWO MACHIN | 26000×2200×2900 L×W×H |
| 2．6 | PWA | 35t |
| 2．7 | Total pouvwa enstale | 175kw |
| 2．8 | Aktyèl pouvwa konsomasyon enèji | 11kw |
| 2．9 | Konsomasyon gaz | 0.4m3/min |
| 2．10 | presyon | 0.8mpa |
| 2．11 | Dlo sikilasyon | 0.4 m3/min |
| 2．12 | VOLTAJ | AC380V±10%50HZ |
| 2．13 | DLO | Dlo endistriyèl, san enpurte, filtre, presyon dlo: 0.4MPa, tanperati dlo: 15-25 ℃. |
| 2．14 | anviwònman travay | 0-40℃ |
| 3.technological pwosesis |
| Alokasyon matyè premyè → MATERYAL CHARGEUR → EXTRUDER → T MOURI MOULI → TAB kalibrasyon → FRAM REFRIJE → 8 ROULÈ BÒT → Aparèy koupe longitudinal → Koupe transverse → transpò → tès → pake |
Tan poste: 27-Jul-2022